Drawn in 2 silhouettesProduction-ready specification
Long Sleeve T-Shirt Tech Pack Template
What separates a long sleeve t-shirt tech pack from a tee is the end of the sleeve, and it is a real decision: rib cuff or plain hem are different pieces at different lengths. This pack draws both and specifies cuff height and relaxed opening as their own rows.
Cuff height and relaxed cuff opening, drawn with and without the rib cuff.
A free long sleeve t-shirt tech pack, as a PDF download: 16 pages and 10 points of measure graded XS–XXL with tolerances, delivered as a vector PDF and an editable .ai file at no cost.
- 16 pages
- one garment
- 10 points
- 5 critical
- XS–XXL
- with tolerances
- PDF + .ai
- vector, editable
Commissioning a long sleeve t-shirt spec from a technical designer typically runs €150 to €900 and takes days. This one was drawn inside a Portuguese factory that cuts the garment every week, and it is in your inbox in minutes.
Your Long Sleeve T-Shirt, finished
- Measurements graded XS–XXL, with tolerances
- Pantone references for every colourway
- Your brand, style code and logo placed
Every decision set in about five minutes. Works with any factory.
Why this one is different
Long Sleeve T-Shirt, specified
The difference between a long-sleeve tee and a tee is the end of the sleeve, and it is a real decision rather than a detail: a rib cuff and a plain hemmed sleeve are different pieces, different lengths and different costs. This pack draws both and specifies the cuff height and relaxed opening as their own rows.
Everything the tee pack carries is carried here too — neck width, collar rib height, shoulder and armhole — so the two garments grade together if you run both.
Drawn with and without the rib cuff, with the cuff height and relaxed opening specified rather than assumed.
Specified down to
- Body
- Sleeves
- Collar rib
- Cuffs
Silhouette
Reference: Stanley/Stella Creator 2.0 Long Sleeve, medium unisex. Check the fit on a sample; secondary dimensions are derived.
Fabric on the spec
200gsm Jersey — a starting point on the material page, written to be overwritten with your own.
Points of measure
Every row in the pack
All 10 of them, with the convention each is measured to. 5 are marked as measurements a factory cannot cut without — they print in bold on the page. The values themselves are inside the document, graded XS–XXL with tolerances; we do not publish them here.
- AHalf chestcriticalMeasure across the garment 2 cm down from the armholes, laid flat.
- BBody length (HPS to hem)criticalMeasure from the highest point of shoulder straight down to the bottom edge.
- CShoulder widthcriticalShoulder point to shoulder point across the back
- DArmhole drop (shoulder to underarm)Shoulder point straight down to the underarm seam. NOTE: the Points of Measure page lists “Arm hole”, which is the bicep width — a different measurement
- ESleeve length (shoulder point to cuff)criticalShoulder point straight along the outer arm to the finished sleeve end
- FBicep width2.5 cm below the armhole, sleeve laid flat
- GCuff heightTop of the cuff rib to the sleeve end
- HCuff opening (relaxed)Sleeve end laid flat, rib unstretched
- N1Collar rib heightNeck seam to the outer edge of the rib
- N2Neck widthcriticalInside edge to inside edge of the collar rib
Measurements in this pack are drafted from published industry sizing (EN 13402-3 body girths; Craft Yarn Council body lengths) with standard ease for the stated fit class. They are a production-ready standard block, not White Cotton house measurements. Confirm the graded spec against your own fit sample before bulk production.
The rest of the 16 pages
What else is in there
Specification — goes to the factory
- Cover & style summary
- Colourway flats, front and back
- Design details with numbered callouts
- Inside construction — every seam named
- Points of measure with tolerances
- Component measurements
- Graded specification, XS–XXL
- Material references
- Colourways with Pantone references
- Artwork placement & sizing
- Bill of materials
- Labels & care, to EU 1007/2011
- Packaging & hangtag
- Production notes
In the Textile Field Guide — with every pack
- Stitch & seam options
- Ribbing, cuffs, hems & necklines
- Washes & finishes
- 31 printing & decoration methods
- Trims & accessories
Every option, pictured, in a separate guide — so the pack itself stays the clean specification your factory reads.
Who it's for
Built for these brands
- Brands running a long-sleeve alongside a short-sleeve tee in the same range
- Anyone specifying a cuff for the first time and unsure what to measure
- Autumn/winter ranges built on jersey rather than fleece
Not for
- Short-sleeve tees (see the T-Shirt pack)
- Fleece crewnecks — a different fabric class and a different block
Usually bought with
FAQ
Before you download
Where can I get a free long sleeve t-shirt tech pack?+
Here — the long sleeve t-shirt tech pack on this page is a free download, in exchange for an email address. It runs 16 pages and 10 points of measure, 5 of them marked critical, graded XS–XXL with tolerances, with 200gsm Jersey written on the material page as a starting point you overwrite with your own. It arrives as a vector PDF and an .ai file, editable in Illustrator, Affinity or CorelDRAW, and carries no supplier details, so it works with any factory.
Rib cuff or hemmed sleeve — which does it specify?+
Both. The pack draws the garment in two silhouettes and you delete the one you are not making. The cuff rows only apply to the ribbed version, and the sleeve length convention is the same either way.
Will it match my short-sleeve tee?+
If you use the T-Shirt pack too, yes — same body block, same measuring conventions, same grade interval. That consistency across styles is the reason to buy more than one pack.
What do I actually receive?+
A vector PDF and an .ai file, by email, at no cost. Both open and edit in Illustrator, Affinity or CorelDRAW — nothing is flattened or locked.
Can I use it with any factory?+
Yes. The document is yours and carries no supplier details — no address, no contact, nothing that ties it to us. It is drawn to industry convention so any factory can read it.
Are the measurements already filled in?+
Yes, as a production-ready standard block graded XS–XXL with tolerances, drawn from published industry sizing. It is a starting point you overwrite to match your own fit sample — the pack says so on the page. Your own fields (brand, style code, season, colourway names, artwork) arrive marked [FILL IN] in red so nothing ships carrying someone else's data.
Wondering what each page is actually for? We walk a finished pack page by page.
The other 12
Every garment in the set
Each one is a different document, not the same file with a different drawing — the rows above exist on this garment and nowhere else. Select as many as you need on the main page and they arrive in one email.
