Production-ready specification
Hoodie Tech Pack Template
Everything that goes in a hoodie tech pack, already drawn: the hood group, the drawcord channel and eyelets, the kangaroo pocket geometry, the rib specifications, and every point of measure graded XS to XXL with tolerances. Open it, put your brand on it, send it to a factory.
Hood construction, drawcord channel and eyelets, kangaroo pocket geometry, rib cuffs and waistband.
A free pullover hoodie tech pack, as a PDF download: 16 pages and 18 points of measure graded XS–XXL with tolerances, delivered as a vector PDF and an editable .ai file at no cost.
- 16 pages
- one garment
- 18 points
- 6 critical
- XS–XXL
- with tolerances
- PDF + .ai
- vector, editable
Commissioning a pullover hoodie spec from a technical designer typically runs €150 to €900 and takes days. This one was drawn inside a Portuguese factory that cuts the garment every week, and it is in your inbox in minutes.
Your Pullover Hoodie, finished
- Measurements graded XS–XXL, with tolerances
- Pantone references for every colourway
- Your brand, style code and logo placed
Every decision set in about five minutes. Works with any factory.
Why this one is different
Pullover Hoodie, specified
A hoodie is the hardest of the basics to specify, because most of what makes it right sits outside the body block. Hood height and hood width decide whether the hood stands up or collapses on the shoulders. Eyelet spacing decides whether the drawcord sits symmetrical to centre front. Pocket placement decides where the bartacks land — the first seam to fail in wear.
Send a factory a flat sketch and a chest measurement and every one of those decisions gets made for you, differently, by whoever is at the table that day. This pack carries them as named rows with tolerances, so the first sample comes back arguing about fit rather than about interpretation.
The only pack in the set with the full hood group — height, width, face edge, eyelet spacing and drawcord cut length — plus the three kangaroo-pocket rows.
Specified down to
- Body
- Hood
- Sleeves
- Cuffs
- Kangaroo pocket
- Waistband ribbing
- Drawstring + eyelets
Silhouette
Reference: Stanley/Stella Cruiser 2.0, relaxed medium unisex. Check the fit on a sample; secondary dimensions are derived.
Fabric on the spec
480gsm Felpa Italiana — a starting point on the material page, written to be overwritten with your own.
Points of measure
Every row in the pack
All 18 of them, with the convention each is measured to. 6 are marked as measurements a factory cannot cut without — they print in bold on the page. The values themselves are inside the document, graded XS–XXL with tolerances; we do not publish them here.
- AHalf chestcriticalMeasure across the garment 2 cm down from the armholes, laid flat.
- BBody length (HPS to hem)criticalMeasure from the highest point of shoulder straight down to the bottom edge.
- CShoulder widthcriticalShoulder point to shoulder point across the back
- DArmhole drop (shoulder to underarm)Shoulder point straight down to the underarm seam. NOTE: the Points of Measure page lists “Arm hole”, which is the bicep width — a different measurement
- ESleeve length (shoulder point to cuff)criticalShoulder point straight along the outer arm to the finished sleeve end
- FBicep width2.5 cm below the armhole, sleeve laid flat
- GCuff heightTop of the cuff rib to the sleeve end
- HCuff opening (relaxed)Sleeve end laid flat, rib unstretched
- HD1Hood heightcriticalHood neck seam to the top of the hood, laid flat
- HD2Hood widthcriticalFront edge to back seam at the widest point
- HD3Hood opening / face edgeAlong the finished front edge of the hood
- HD4Eyelet spacingBetween eyelet centres, symmetric to centre front
- HD5Drawstring cut lengthFull cut length of the cord
- R1Waistband heightTop of the rib to the finished hem edge
- R2Waistband width (relaxed)Laid flat, edge to edge, rib unstretched
- KP1Kangaroo pocket widthAcross the pocket at its widest, laid flat
- KP2Kangaroo pocket heightTop edge of the pocket to the bottom seam
- KP3Pocket placementFrom centre front and from the waistband seam
Measurements in this pack are drafted from published industry sizing (EN 13402-3 body girths; Craft Yarn Council body lengths) with standard ease for the stated fit class. They are a production-ready standard block, not White Cotton house measurements. Confirm the graded spec against your own fit sample before bulk production.
The rest of the 16 pages
What else is in there
Specification — goes to the factory
- Cover & style summary
- Colourway flats, front and back
- Design details with numbered callouts
- Inside construction — every seam named
- Points of measure with tolerances
- Component measurements
- Graded specification, XS–XXL
- Material references
- Colourways with Pantone references
- Artwork placement & sizing
- Bill of materials
- Labels & care, to EU 1007/2011
- Packaging & hangtag
- Production notes
In the Textile Field Guide — with every pack
- Stitch & seam options
- Ribbing, cuffs, hems & necklines
- Washes & finishes
- 31 printing & decoration methods
- Trims & accessories
Every option, pictured, in a separate guide — so the pack itself stays the clean specification your factory reads.
Who it's for
Built for these brands
- Streetwear and essentials brands whose hoodie is the anchor product of the range
- Founders who have a fit sample they like and need it written down before it goes to bulk
- Anyone who has already had a hood come back the wrong depth
Not for
- Brands who want the garment designed for them — this is a specification format, not a design service
- Zip-front hoodies, which are a different document (see the Zip Hoodie pack)
Usually bought with
FAQ
Before you download
Where can I get a free pullover hoodie tech pack?+
Here — the pullover hoodie tech pack on this page is a free download, in exchange for an email address. It runs 16 pages and 18 points of measure, 6 of them marked critical, graded XS–XXL with tolerances, with 480gsm Felpa Italiana written on the material page as a starting point you overwrite with your own. It arrives as a vector PDF and an .ai file, editable in Illustrator, Affinity or CorelDRAW, and carries no supplier details, so it works with any factory.
Does this cover a zip hoodie too?+
No. A zip hoodie splits the front panel, replaces the kangaroo pocket with split pockets and adds the zip length and stop position — different pattern pieces and different rows. That is the Zip Hoodie pack.
Is the hood drawn with the drawcord?+
Yes. The drawcord channel, eyelet spacing and the cord's full cut length are all specified rows, and the trims appear on the bill of materials rather than being left to the factory to source blind.
What do I actually receive?+
A vector PDF and an .ai file, by email, at no cost. Both open and edit in Illustrator, Affinity or CorelDRAW — nothing is flattened or locked.
Can I use it with any factory?+
Yes. The document is yours and carries no supplier details — no address, no contact, nothing that ties it to us. It is drawn to industry convention so any factory can read it.
Are the measurements already filled in?+
Yes, as a production-ready standard block graded XS–XXL with tolerances, drawn from published industry sizing. It is a starting point you overwrite to match your own fit sample — the pack says so on the page. Your own fields (brand, style code, season, colourway names, artwork) arrive marked [FILL IN] in red so nothing ships carrying someone else's data.
Wondering what each page is actually for? We walk a finished pack page by page.
The other 12
Every garment in the set
Each one is a different document, not the same file with a different drawing — the rows above exist on this garment and nowhere else. Select as many as you need on the main page and they arrive in one email.
